The Expert in data collection, vibration analysis and field balancing
VIBXPERT II is an all-in-one data collector, vibration analyzer and field balancer based on latest technology.
Fastest measurements using trending spectra
User-friendly and intuitive operation
Powerful analysis and diagnostic tools for machine trouble shooting
Most of the abnormal vibrations on rotating equipment are caused by unbalance, misalignment, defective bearings, gear damage or looseness. These defects may occur at short intervals. In-depth analysis allows identifying the root cause of such recurring defects.
Useful analysis tools are e.g. resonance tests, bump testing, modal analysis, ODS analysis, cross channel phase, orbit measurements, high resolution spectra analysis, long time wave recording and shaft centerline plots.
VIBXPERT II offers all these powerful analysis tools in one user friendly system. VIBXPERT II has a modular structure that allows you to upgrade the device at any time from a basic package for fast route-based data collection to a full-blown 2 channel analyzer with advanced analysis functionalities.
Besides the high-end analysis measurements capabilities, field balancing options and route data collection functionalities, VIBXPERT II also offers a special machine template mode which is typically used to perform acceptance measurements of newly produced or installed rotating equipment such as fans, pumps, electric motors or generators. The machine templates includes all relevant machine information such as RPM, roller bearing defect frequencies, warning and alarm thresholds, which allow you to provide a standardized, fast and easy acceptance inspection.
As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.
The VIBXPERT update tool is used to load the VIBXPERT II firmware into the instrument. Please refer to the README file for further information on requirements, changes, etc.
In order to install the latest firmware proceed as follows:
Download the VIBXPERT II firmware file on your PC.
Unpack the file and run the VIBXPERT Update tool. Please use the latest VIBXPERT UpdateTool.
Follow the instructions on the screen.
Smart Tools
VIBXPERT
smart tools
Notes
The VIBXPERT utility software is used for data transfer between the instrument and a PC. Please refer to the README file for further information on requirements, changes, etc.
The VIBXPERT Client software is used to demonstrate the operation of the VIBXPERT instrument on a PC or Laptop.
Automatic Switchbox
High-quality data is critical to the success of your reliability-based maintenance program (RbM).
However, many factors can significantly impact data quality.
Vibration readings of route-based data collection must be measured at exactly the same location every time.
Measurements have to be performed quickly in order to save time and even untrained staff may have to collect data.
Last but not least, how can you make hard-to-reach measurement locations part of your RbM program
without exposing employees to safety hazards during data collection?
PRUFTECHNIK’s Automatic Switchbox for VIBXPERT II is exactly the right solution to these issues.
Compared to a standard switchbox whereby operators still may mix up measurement channels
as they have to manually “turn the knob”, the proven Automatic Switchbox solution rules out human errors.
PRUFTECHNIK’s unique concept guarantees:
Maximum reliability of vibration data
Maximum efficiency – never has routine data collection been this short
Maximum security for operators
Maximum coverage – unlimited cable length with PRÜFTECHNIK’s unique sensor concept*
Many customers have understood the advantages of Automatic Switchboxes and have taken their RbM program to the next level.
If you too are ready to take the next step, contact us for more details.
Working principle of a manual switchbox
Automatic switchbox connected to a data collector. Several switchboxes can be connected in series.
Integration into intrinsically safe areas.
Become a VIBXPERT - Trade In
Make way for new technology and do not wait to
become a VIBXPERT
DROP your current vibration measuring device and TRADE-IT-IN at a special price for our powerful & proven vibration analyzer VIBXPERT II. Just leave your vibration analyzer1 with us and take home your new VIBXPERT II.
Take advantage of the latest condition monitoring technology.
VIBXPERT II improves vibration data collection and signal analyzing significantly and is perfectly designed to suit the needs of both vibration specialists and beginners.
Reviews
There are no reviews yet.